Guy Grip

營業項目：OTOWA 高低壓避雷器、HASEGAWA檢電器、碳化矽元件、隔離器、YS絕緣手套、示溫貼紙、繞線夾、預型保護條、M-System 轉換器，如有需要請和我們聯絡！

　

　

　

Product ID: GG

Grip

The product are for use as terminating fittings with guy or messenger wires. Strand grip is a bumble of several preformed helical special galvanized wires glued together by a glue agent, the spiral inside of which is veneered with aluminum oxide grip as a friction increasing agent and hence, to increase its capability of holding to the steel strand enveloped in the middle. Application of the Strand grips to the guy or messenger wire may be effected with the use of a simple pulling device and no other tools are required. All grips have been designed to withstand the ultimate strength stands. As grips are constructed from the same basis material as the strand for which they are designed, there is no risk of any corrosive action between the grip and the strand.

Features:

The grips are made of special steel wires and have the capacity of mechanical strength over than that of the steel strand.

The working can be easily completed without any special tools or difference due to personal factors.

The accessory of the grips is fewer and working is easier than wire crip or clamp, hence the working time will also be shorted by 3/4 of the original needed.

TWE Grip Specifications
Model	Normal area (mm²⁾	^Construction	^{Overall Diameter(mm)}	^{Rods Dia.(mm) X Rods per Set}	^{A (Applied Length)}	^{C Dimension (mm)}	^{Units / carton}	^{Kg / ^Carton}	^{Min. Holding Strength (Kg)}	^{Weight (g)}
^{Thimble & Insulator Type}
^{GG- 601T}	^{5.5 mm2}	^(7/1.0)	^3.0	^{1.50^×³}	⁴⁰⁰	³⁵	²⁰⁰		⁵⁰⁰	³⁹
^{GG- 801T}	^{8 mm2}	^(7/1.2)	^3.6	^1.60×4	⁴⁰⁰	³⁵	²⁰⁰	¹³	⁷⁰⁰	⁵⁹
^GG-1401T	^14mm2	^(7/1.6)	^4.8	^2.15×4	⁴⁶⁰	³⁵	¹⁰⁰	²⁰	^1,620	¹²¹
^GG-1801T	^18mm2	^(7/1.8)	^5.4	^2.15×4	⁵⁵⁰	³⁵	¹⁰⁰	¹⁸	^2,040	¹⁴³
^GG-2201T	^22mm2	^(7/2.0)	^6.0	^2.15×5	⁵⁸⁰	³⁵	¹⁰⁰	²³	^2,520	¹⁸⁸
^GG-3001T	^30mm2	^(7/2.3)	^6.9	^2.48×5	⁶¹⁰	³⁵	⁵⁰	¹⁵	^3,270	²⁶²
^GG-3501T	^35mm2	^(7/2.6)	^7.8	^2.80×5	⁶⁶⁰	³⁵	⁵⁰	²⁰	^4,180	³⁶⁰
^GG-5/16"T	^5/16"	^(7/2.642)	^7.9	^2.80×5	⁷⁸⁷	³⁵	⁵⁰	²⁴	^5,090	⁴²⁷
^GG-4501T	^45mm2	^(7/2.9)	^8.7	^2.48×6	⁷¹⁰	⁴⁰	⁵⁰	²²	^5,200	³⁶⁴
^GG--3/8"T	^3/8"	^(7/3.048)	^9.1	^2.48×6	⁸⁸⁹	⁴⁰	⁵⁰	²⁵	^4,900	⁴⁵¹
^GG-5501T	^55mm2	^(7/3.2)	^9.6	^2.70×6	⁷⁵⁰	⁴⁵	⁵⁰	²⁵	^6,300	⁴⁵⁵
^GG-6501T	^65mm2	^(7/3.5)	^10.5	^2.80×6	⁸⁰⁰	⁴⁵	⁵⁰	²⁸	^7,560	⁵²⁰
^{Pole Type I (Single Wrap)}
^{GG- 601P}	^{5.5 mm2}	^(7/1.0)	^3.0	^{1.50^×³}	⁵⁵⁰	¹⁸⁰			⁵⁰⁰	⁵⁹
^GG-801P	^{8 mm2}	^(7/1.2)	^3.6	^1.60×4	⁵⁷⁰	¹⁸⁰	²⁰⁰	²⁰	⁷⁰⁰	⁹¹
^GG-1401P	^14mm2	^(7/1.6)	^4.8	^2.15×4	⁶⁵⁰	¹⁸⁰	¹⁰⁰	²⁴	^1,620	¹⁸⁵
^GG-1801P	^18mm2	^(7/1.8)	^5.4	^2.15×4	⁷⁴⁰	¹⁸⁰	¹⁰⁰	²⁶	^2,040	²⁰⁷
^GG-2201P	^22mm2	^(7/2.0)	^6.0	^2.15×5	⁷⁷⁰	¹⁸⁰	¹⁰⁰	³³	^2,520	²⁶⁷
^GG-3001P	^30mm2	^(7/2.3)	^6.9	^2.48×5	⁹¹⁰	¹⁸⁰	⁴⁰	¹⁷	^3,270	⁴¹³
^GG-3501P	^35mm2	^(7/2.6)	^7.8	^2.80×5	⁹⁶⁰	¹⁸⁰	⁴⁰	³³	^4,180	⁵⁵²
^GG-4501P	^45mm2	^(7/2.9)	^8.7	^2.48×6	¹⁰¹⁰	¹⁸⁰	⁴⁰	²⁴	^5,200	⁵⁴⁴
^GG--3/8"P	^3/8"	^(7/3.048)	^9.1	^2.48×6	¹⁵²⁴	¹⁸⁰	⁴⁰	³⁵	^4,900	⁷⁹³
^GG-5501P	^55mm2	^(7/3.2)	^9.6	^2.70×6	¹⁰⁵⁰	¹⁸⁰	⁴⁰	²⁸	^6,300	⁶⁶⁷
^GG-6501P	^65mm2	^(7/3.5)	^10.5	^2.80×6	¹¹⁰⁰	¹⁸⁰	⁴⁰	³¹	^7,560	⁷⁴⁹
^GG-5/16"P	^7/16"	^(7/3.683)	^11.0	^2.80×6	¹⁶⁵⁰	¹⁸⁰	⁴⁰	⁴⁸	^9,455	¹⁰⁸⁸
^{Pole Type II (Double Wrap)}
^GG-1402P	^14mm2	^(7/1.6)	^4.8	^2.15×4	⁶⁵⁰	¹⁸⁰	¹⁰⁰	³⁰	^1,620	²⁵³
^GG-1802P	^18mm2	^(7/1.8)	^5.4	^2.15×4	⁷⁴⁰	¹⁸⁰	¹⁰⁰	³³	^2,040	²⁷⁵
^GG-2202P	^22mm2	^(7/2.0)	^6.0	^2.15×5	⁷⁷⁰	¹⁸⁰	¹⁰⁰	⁴⁰	^2,520	³⁵³
^GG-3002P	^30mm2	^(7/2.3)	^6.9	^2.48×5	⁹¹⁰	¹⁸⁰	²⁰	¹²	^3,270	⁵²⁷
^GG-3502P	^35mm2	^(7/2.6)	^7.8	^2.80×5	⁹⁶⁰	¹⁸⁰	²⁰	¹⁵	^4,180	⁶⁹⁷
^GG-5/16"2P	^5/16"	^(7/2.642)	^7.9	^2.80×5	¹⁴⁰⁰	¹⁸⁰	²⁰	²⁰	^5,090	⁹²⁴
^GG-4502P	^45mm2	^(7/2.9)	^8.7	^2.48×6	¹⁰¹⁰	¹⁸⁰	²⁰	¹⁵	^5,200	⁶⁸¹
^GG--3/8"2P	^3/8"	^(7/3.048)	^9.1	^2.48×6	¹⁵²⁴	¹⁸⁰	²⁰	²²	^4,900	⁹³⁰
^GG-5502P	^55mm2	^(7/3.2)	^9.6	^2.70×6	¹⁰⁵⁰	¹⁸⁰	²⁰	¹⁸	^6,300	⁸³⁰
^GG-6502P	^65mm2	^(7/3.5)	^10.5	^2.80×6	¹¹⁰⁰	¹⁸⁰	²⁰	²⁰	^7,560	⁹²³
^{Splice Type}
^GS-14	^14mm2	^(7/1.6)	^4.8	^2.15×4	⁵⁰⁰		¹⁰⁰	¹⁷	^1,620	¹³²
^GS-18	^18mm2	^(7/1.8)	^5.4	^2.15×4	⁶⁰⁰		¹⁰⁰	²⁰	^2,040	¹⁵⁶
^GS-22	^22mm2	^(7/2.0)	^6.0	^2.15×5	⁶⁶⁰		¹⁰⁰	³⁰	^2,520	²¹⁴
^GS-30	^30mm2	^(7/2.3)	^6.9	^2.48×5	¹⁰⁰⁰		³⁰	¹³	^3,270	⁴²²
^GS-35	^35mm2	^(7/2.6)	^7.8	^2.80×5	¹¹⁰⁰		³⁰	¹⁸	^4,180	⁵⁸⁹
^GS-45	^45mm2	^(7/2.9)	^8.7	^2.48×6	¹²⁰⁰		³⁰	¹⁹	^5,200	⁶⁰³
^GS-55	^55mm2	^(7/3.2)	^9.6	^2.70×6	¹³⁰⁰		³⁰	²⁴	^6,300	⁷⁷²
^GS-65	^65mm2	^(7/3.5)	^10.5	^2.80×6	¹⁴⁰⁰		³⁰	²⁸	^7,560	⁸⁹²

1. The Grip are left-hand lay standard.

2. Galvanizing of strand grip is in accordance with ASTM class "A" or "C" or "B" zin coating. Please specify which coating is required when ordering.

3. These grip are of cabled loop design and made of galvanized steel.

4. These grip have been approved by TPC(Taiwan Power Company), ITA (International Telecommunication Administration ) and listed in their specification.

Application :

首頁 / Armor Rod / Surge Arrester / Guy Grip / SiC Element / Isolator / thermal label

將關於這個 Web 站台的問題或建議的郵件寄到 tawei.sales@msa.hinet.net